Description
SaniDate 5.0 Organic Sanitizer / Disinfectant
An organic commercial cleaner that comes in liquid concentrate and is used for the sanitation of hard surfaces in a wide variety of industrial, commercial, and agricultural environments.
* Registered and approved by the Environmental Protection Agency (EPA)
** Proven effective against the Human Coronavirus, E-coli, and Salmonella, making it a valuable resource for public health precautions (see full Coronavirus Press Release here)
HOW DOES IT KILL GERMS?
When applied to any hard surface, SaniDate 5.0’s activated peroxygen chemistry reacts to a broad spectrum of fungi and bacteria, and kills (oxidizes) them on contact.
HOW IS IT APPLIED?
SaniDate 5.0 can be sprayed, foamed, fogged or injected directly into tanks or spray systems. See our Biofogger and Biofoamer for easy application options.
For lighter applications, a cloth, mop, sponge, scrubber, or brush can be used.
WHERE IS IT USED?
SaniDate 5.0 can be used on any hard (non-porous) surfaces, including walls, floors, chairs, tables, countertops, bathroom fixtures, exterior of kitchen appliances, coolers, shelves, sinks, racks, carts, tile, vinyl, linoleum, plastic, porcelain, polyethylene, glass, stainless steel, fan blades, piping, drains, water systems, vats, tanks, filter housings, valves, and pumps. See “Uses” tab for environments and common use scenarios.
WHY IS SANIDATE 5.0 THE RIGHT CHOICE?
Because it is environmentally friendly (non-harmful to workers) and it effectively eradicates dangerous human and animal pathogens.
More Benefits
SaniDate 5.0 is used for the sanitation of hard surfaces in a wide variety of industrial, commercial, and agricultural environments.
Major Benefits:
- Effectively eradicates both human and animal pathogens
- Environmentally friendly (non-harmful to workers)
- Zero Hour REI (re-entry interval) for animals and humans
- EPA registered and approved
- OMRI approved for organic crops
- Fulfills National Organic Program (NOP) standards
- Chlorine alternative
- No ruinous runoffs or residues
- Concentrate will not freeze
Effective against the following:
- Human Coronavirus
- E-coli (Escherichia coli)
- Salmonella enteriditis
- Salmonella typhimurium
- Enterobacter aerogenes
- Streptococcus pyogenes
- Pediococcus damnosus
- Proteus vulgaris
- Lactobacillus malefermentans
- Klebsiella pneumoniae
Uses
Effectively used in the following environments:
- Office buildings, workplaces
- Educational facilities, schools, classrooms, cafeterias
- Retail and wholesale establishments
- Animal care facilities like veterinary clinics, animal hospitals, animal life science laboratories, catteries, cages, and kennels
- Farming facilities, including poultry premises and hatcheries, as well as livestock quarters, stalls, stables, and animal pens
- Food rendering and processing plants, including packinghouses
- Cosmetic facilities, including salons and barber shops
- Transportation facilities, including vehicles and trailers
- Healthcare and pharmaceutical facilities
- Recreational facilities
Common use scenarios:
- Disinfecting high-touch surfaces such as tables and countertops
- Disinfecting high-traffic zones such as floors and walls
- Disinfecting any non-porous surfaces susceptible to mold and mildew
- Disinfecting trucks and trailers to prevent cross-contamination
- Treating water systems to eliminate deposits and control bacteria
- Use in foot baths, walk-through trays and on mats to prevent cross-contamination between buildings and rooms
Q&A
Q: How can SaniDate 5.0 be used to clean lightly soiled hard, non-porous surfaces such as those listed above?
A: For surfaces that are lightly soiled or have been pre-rinsed for heavy contamination, use a rate of 0.5 fluid ounce per gallon of water.
Q: How can SaniDate 5.0 be used to clean heavily soiled hard, non-porous surfaces?
A: Use a rate of 1 fluid ounce per gallon of water. Apply SaniDate solution with a cloth, mop, sponge, scrubber, brush, or coarse spraying device to ensure that all affected surfaces are thoroughly soaked. Ensure that all surfaces stay wet for at least 10 minutes. Then remove the Sanidate solution and residual dirt or grime with a wet, clean cloth, mop, or wet vacuum. Prepare a fresh SaniDate solution daily, or when the solution gets diluted or dirty. Apply the solution every seven days, or more frequently if new contamination forms.
Q: How can SaniDate 5.0 be used to prevent mold and mildew build-up on new hard, non-porous surfaces?
A: To prevent surface mildew and mold build-up on non-porous, hard surfaces in new or renovated buildings, mix SaniDate 5.0 at a rate of 0.5 fluid ounces per gallon of water. Apply the solution evenly over the surfaces to be protected using an airless sprayer, paintbrush, backpack sprayer, or low pressure hand wand. Ensure surfaces are uniformly wet without pooling or runoff. Treated surfaces must be totally dry before they can be painted or covered with wallboard, siding, or flooring. Although this treatment will prevent mold and mildew build-up in most situations, if mildew or mold does appear, repeat the application of Sanidate 5.0 as needed, following the additional steps listed below for remedial mold treatment.
Q: How can SaniDate 5.0 be used as part of a large-scale mold removal or water damage restoration project?
A: Follow the instructions given in the previous question to prevent mildew and mold build-up on new hard, non-porous surfaces. In addition, investigate to find the root causes of the build-up, take the necessary steps to eliminate them, and dry the affected areas to under 20% moisture content before reapplying SaniDate 5.0. Mildew and mold may recur where there is standing water, relative high humidity, or hidden water leaks.
Q: How can SaniDate 5.0 be used to treat flooded areas and sewer backups?
A: Mix SaniDate 5.0 at a rate of 1 fluid ounce per gallon of potable water. Remove filth by wiping, mopping, or coarsely spraying affected surfaces with the SaniDate 5.0 solution. Surfaces used for food preparation must subsequently be rinsed using potable or sterile water.
Q: What are some other good sources of information on how to treat mold and mildew?
A: For useful standards and guidelines to follow, please visit:
Volume Pricing
Volume pricing is available for this product. Contact us for a multiple drum discount.
Disclaimer
PESTICIDE APPLICATION LICENSE DISCLAIMER FOR PURCHASE OF COMMERCIAL & AGRICULTURAL PRODUCTS:
By purchasing a commercial or agricultural product from this website, you are acknowledging that you have checked with the authorities at your State or Province’s Department of Agriculture and are licensed to apply the product you are purchasing.
N. Nurse –
I must tell you with great pleasure that we have passed our GMP & HACCP audit successfully just last week. So I must thank you for making such a wonderful product that we are using that our managers (very picky!) are very comfortable with. SaniDate 5.0 has a big part of our Food Safety Program and its accomplishment. So THANK YOU! N. Nurse Hokto Kinoko Company
Reviewed by: N. Nurse from San marcos, CA. on 8/7/2011
Gideon –
Very good product. This was recommended by our extension agency
Reviewed by: Gideon from Indiana. on 9/24/2015